Friendly IPTV Player User manual

December 16, 2016 | Author: Audra Page | Category: N/A
Share Embed Donate


Short Description

1 Friendly IPTV Player User manual Appointment Friendly IPTV Player (FPlayer) player for streaming IPTV and video stream...

Description

https://f-player.ru version 1.1.9

Friendly IPTV Player User manual Appointment Friendly IPTV Player (FPlayer) – player for streaming IPTV and video streaming on smart LG TV’s running WebOS all versions. The main purpose - streaming IP - TV.

Basic functions - interface languages – Russian, English - download of the playlist in the EXTM3U format directly from the specified URL - support program in XMLTV format - the advanced display settings of the program - support UDP Proxy - protection of children (setting parental PIN - code) - the ability to add and display your favorite channels

Technical requirements - connected to the Internet - TV LG running WebOS - To use UDP function - Proxy - Proxy UDP server (server, router, etc.)

Basic concepts Player –Program to LG TV running WebOS – Friendly IPTV Player Remote control - The main remote control TV Magic Wand – Optional remote control TV Multicast – UDP - traffic Unicast – TCP – traffic The transfer - the current broadcast programs on IPTV channels currently playing stream IPTV The main playback screen - a screen that displays a list of channels and unicast carried playback stream.

https://f-player.ru version 1.1.9

Interface description Settings screen Setup screen is controlled by the arrows to the left up and to the right-up-down on the remote control, switching between the setting items from left to right from top to bottom. The OK button on the remote control – confirm input. You can also be controlled by the second console Magic Wand, if your TV on which you run the player is equipped with them.

Description settings General settings

Picture 1 Settings

1. Language - Select program language - Russian, English. To switch you need to select the language you want by moving the cursor over it - in this case the selected language is highlighted. To select the application you must press the OK button on the remote. 2. Playlist URL - link to playlist EXTM3U format (for more information about the format can be found here https://ru.wikipedia.org/wiki/M3U Every time you start the player, the channel list is downloaded to the specified URL. If the URL isn’t specified or doesn’t fit EXTM3U - video stream is not possible. Attention ! Get a link to the URL of the playlist, you can have your provider provides a service for broadcasting streaming IP - TV! 3. Hide channel list after, sec - number of seconds, after which the channel list and all information layers (software, clock, etc.) will be automatically hidden. If you specify 0 - channel list will not be hidden automatically, with only the remote button. 4. Enable Parental Control - if this option is enabled, then going to view the stream (channel) having in the playlist attribute "censored" - the app requires you to enter a PIN - code defined in

https://f-player.ru version 1.1.9 step 5, otherwise the flow of play will not start. If this attribute is not set - channel playback is performed normally. For more information see "Supported EXTM3U attributes" 5. Change pin-code - when you click on the button "Change" will be called a dialogue change PIN parental control access code. To change the PIN - code, you must first enter the old pin - code (default is 0000), then the new and confirm the new PIN - code, as shown in Pictures 2 - 4.

Picture 2 Change Parental PIN - code – Input old PIN – code

Picture 3 Change Parental PIN - code - Input new PIN – code

Picture 4 Change Parental PIN - code – retype new PIN - code

https://f-player.ru version 1.1.9 6. Clear favorite channels - clears the entire list of favorite channels, set earlier. 7. Show clock on main screen - if this option is enabled, the main playback screen in the top right corner displays the current time. 8. Save and back to channels - this button saves the settings and returns the user to the main playback screen 9. Back to channels - go to the main playback screen without saving the settings. The transition between settings sections 10 - 13 is also carried out using the remote or by using the Magic Wand. Settings TV program The player supports a program in the XMLTV format (xmltv.xml), gzipped XMLTV (xmltv.xml.gz). The program file is loaded every time you start the player, the old version of the program that was previously downloaded is deleted. XMLTV format description can be found at this link http://wiki.xmltv.org/. For more information about setting up programs on the server side can be found in "Supported attributes EXTM3U".

Picture 5 Section settings TV program

1. Enable load program on channels list - if this option is enabled and if the playlist contains the link to the program in the XMLTV format - under the name and logo of the channel shows the current transfer received from the program and the next program (if any). Below shows the progress of the current transfer. 2. Enable load program for current played channel - if this option is enabled for the current channel is the program - it will be displayed in the information layer located at the bottom right corner of the screen. 3. Time zone offset- this parameter is used to fine-tune the display program. Not all providers and programmers clearly follow standard XMLTV - sometimes not specify an offset from the time

https://f-player.ru version 1.1.9 zone or incorrect time zone is exposed in the TV settings - from - behind this possible incorrect time offset program - this option allows you to manually adjust the time zone Setup UDP – proxy The player supports automatically converting the multicast - link such as udp: //@224.0.0.1: 3001 in unicast links type http://your_udp_proxy:your_udp_proxy_port/udp/224.0.0.1:3001 This option is necessary to convert the final multicast - traffic provider in unicast - flows to view IPTV channels in the player. To work correctly, need the support of this option, your home network equipment. In addition, it is necessary to produce UDP settings - proxy on your equipment, enabling this option and specify the correct port in the settings. After adjustment of the equipment is made, you must specify these parameters in the UDP section - proxy (Picture 6).

Picture 6 Settings UDP -proxy

1. Enable UDP - proxy - if enabled, the player while loading the channel list defines the type of flow (udp: // - multicast, http: // - unicast) and converts them. 2. Proxy IP address – Address UDP –proxy 3. Proxy Port - the UDP port - proxy specified earlier when you set up your network equipment.

Settings license Player free download in app store LG for WebOS - there is a trial version that has one limitation - the number of channels in the playlist can’t be more than 10, that is, if the channel list more - they are simply ignored. The list displays only the first 10. In order to remove the restriction on the number of channels you need to purchase a PIN - code on the player's website (https://f-player.ru). After successful payment via PayPal - PIN - code to unlock the full version will be sent to your e-mail address listed in your PayPal account settings, or to a specified e-mail address in case of payment by other methods. One pin - code can be used simultaneously on the same

https://f-player.ru version 1.1.9 TV, the validity of PIN - code has no restrictions. When you unlock the full version of the application data on the license and the copy of a program stored in the cloud player. If you try to unlock the other copies of this program - the same PIN code - license information is updated and unlocked only considered the player in which the pin - code was entered last. Attention! If you haven’t received a PIN - code, please write to us via the feedback form: https://fplayer.ru/feedback indicating the transaction number and email address. The resulting pin - code must be specified in the special program of the dialogue by pressing "Unlock version of F-Player» (Picture 7). After that, in this section you can see information about the current license (Picture 10).

Picture 7 Information about the license and unlock the full version of the player

1. TV UID - unique identifier for the program is generated once after installing the program. After you reinstall the program changes! 2. Unlock full version F-Player - unlock button initiates a dialogue full version (Picture 8). In the case of entering the correct pin-code, you will see an information message about what the full version of the program has been successfully unlocked (Figure 9). In the case of incorrect entering of pin - code, you will see an error message. Attention! If you are sure that enter pin - code correctly and without errors, but the system unlocks the full version of the player to your pin - code, please contact the program developers using the feedback section on the site link https://f-player.ru/feedback, putting enter the pin-code and unique identifier UID TV.

https://f-player.ru version 1.1.9

Picture 8 Enter pin - code to unlock the full version of the player

Picture 9 Successfully unlock the full version of the player

Picture 10 License code in the full version of the player

https://f-player.ru version 1.1.9

Main screen When you first launch the player, as the URL is not yet a playlist, the player will report that you don’t specify the URL of the playlist, and asked to do it. If you press the red button on the remote, the transition to the settings section occurs immediately if you do not press - then go to settings will occur automatically after a short period of time.

Picture 11 The main player screen

1. Up Arrow - is displayed when using the optional remote control Magic Wand (like a down arrow -position 5). It allows you to scroll through channel list upwards. 2. The line in the channel list. It shows the channel logo (if specified in the playlist), the channel name. If you enable the option "Load a program in the channel list" - in the same broadcast program displays the current and next transmission queue. The green bar shows the progress of the current program. 3. The current position of the cursor in the channel list 4. Star – indicates that the channel is in the favorite channel list 5. Arrow down - is displayed when using the optional remote control Magic Wand (like a down arrow - position 5). It allows you to scroll down the list of channels. 6. Current time - displayed if the option "Display the clock on the home screen. 7. The information layer with the program of the current transmission channel. 8. The program of the current channel - is displayed if the option "Download program for playback channel" in the playlist contains a link to the program. 9. Quick Access Buttons - duplicated the corresponding colored button on the remote - Settings - opens the Settings screen. - Favorites - switch the channel list with full list of only your favorite channels and back. - Show fav - add the current channel is marked with the cursor (3) to favorites.

https://f-player.ru version 1.1.9 - Show / Hide Channels - hiding information layers (list of channels, program guide, the clock), leaving only the playback window. Automatically hidden after a time specified in the settings ("Basic" - "Hide the channel list"). If all information layers are hidden - it displays them. It is also possible to display by pressing the OK button on the remote control or click the cursor on the screen Magic Wand.

Favorite channels Selected by pressing the blue button on the remote control or click on the button "Favorites" on the TV screen. When you select a favorite channel list is loaded, if it is not empty. When you press the blue button - loaded normal full list of channels in the playlist.

Picture12 A list of the favorite channels

https://f-player.ru version 1.1.9

Supported attributes EXTM3U Consider the example of a playlist EXTM3U #EXTM3U url-xml="http://playlistserver/xmltv.xml.gz" deinterlace=1 #EXTINF:1 censored="0" tvg-id="1" group_id="15" group-title="Essential" tvg-logo="http://channelserver/1.png", Channel 1 http://yourserver/iptv/1 #EXTINF:2 censored="0" tvg-id="2" group_id="15" group-title="Essential " tvg-logo="http://channelserver/2.png", Channel 2 http://yourserver/iptv/2 #EXTINF:226 censored="1" tvg-id="3" group_id="2" group-title="Adult" tvg-logo="http://channelserver/3.png", Channel 3 http://yourserver/iptv/3 #EXTINF:228 censored="1" tvg-id="4" group_id="2" group-title="Adult" tvg-logo="http://channelserver/4.png", Channel 4 http://yourserver/iptv/4

url-xml - indicates a link to the program in xmltv format - supports both as gzip, and program in the "pure» xml. Examples of references http://playlistserver/xmltv.xml.gz, http://playlistserver/xmltv.xml #EXTINF:1 – 1 – Channel number censored – the attribute defining feature of a channel for adults. If the attribute looks like as censored = "1" - then if you try to play this channel will be prompted for a pin - code for parental control, if parental control option is enabled in the settings. tvg-id="1" – channel identifier, the channel identifier must correspond to the program file xmltv. Example First channel group_id=”15” – channel group identifier (currently not used) group_title = “Channel group” – channel group name (not used yet) tvg-logo – picture link - channel logo http://yourserver/iptv/1 - link to the stream channel, and may begin with udp:// - if IPTV provider is using multicast.

View more...

Comments

Copyright � 2017 SILO Inc.