References. Baligh, M.M. (1976). \"Cavity Expansion in Sands with Curved Envelopes.\" Journ. of Geot. Engrg. Div. 111(GT9), p

References

Arias, A. (1970). "A Measure of Earthquake Intensity." Seismic Design of Nuclear Power Plants, R.J. Hansen (ed.), The M.I.T. Press, Cambridge, MA, p. 438-483. Azzouz, A., Baligh, M., and Ladd, C. (1983). "Cone Penetration and Engineering Properties of Soft Orinoco Clay." Proc. of the 3rd Inter. Conf. on Behaviour of Offshore Structures, Cambridge, MA, Vol. 1, p. 161-180. Baez, J.I. (1995). "A Design Model for the Reduction of Soil Liquefaction by VibroStone Columns." Ph.D. Dissertation. Univ. of Southern California, 145 p. Baldi, G., Bellotti, R., Ghionna, N., Jamiolkowski, M., and Pasqualini, E. (1986). “Interpretation of CPT''s and CPTU's, 2nd Part: Drained Penetration of Sands.” 4th Intern. Geotechnical Seminar: Field Instrumentation and In-Situ Measurement, Singapore, p. 129-156. Baligh, M.M. (1976). "Cavity Expansion in Sands with Curved Envelopes." Journ. of Geot. Engrg. Div. 111(GT9), p. 1108-1136. Been, K., Crooks, J.H., Becker, D.E., and Jefferies, M.G. (1986). "The Cone Penetration Test in Sands: Part I: State Parameter Interpretation." Geotechnique, 36(2), p. 239-249. Bellotti, R., Crippa, V., Pedroni, S., and Ghionna, V. N. (1988). “Saturation of Sand Specimin for Calibration Chamber Tests.” Proc. of the 1st Inter. Symp. on Penetration Testing (ISOPT-1), Orlando, FL, Balkema, p. 661-671. Bruzzi, D. and Battaglio, M. (1987). “Pore Pressure Measurements During Cone Penetration Tests.” ISMES Publication No. 229, Bergamo, Italy, 124 p. Bunnell, D. B. (1978). “A Study of the Excess Pore Pressures Generated by a Penetrating Probe in Granular Soils.” M.E. Thesis, University of Florida, Gainesville, 101 p. Caillemer, B. M. (1975). “An Experimental Study of the UF Static Cone Calibration Chamber, Part 1; Density Distribution of Pluvially Placed Sand, Part 2: Pore Pressure Distribution Around Fugro Tip.” M.S. Thesis, University of Florida, Gainesville.

295

John A. Bonita

References

Casagrande, A. (1936). “Characteristics of Cohesionless Soils Affecting the Stability of Slopes and Earth Fills.” Journ. of the Boston Society of Civil Engineers, Jan. 1936. (Originally Published in "Contributions to Soil Mechanics, 1925-1940", Boston Society of Civil Engineers, Oct. 1940). Casagrande, A. (1976). "Liquefaction and Cyclic Deformation of Sands - A Critical Review." Harvard Soil Mech. Series No. 88, Harvard University, Cambridge, MA. Castro, G. (1969). "Liquefaction of Sands." Ph.D. Dissertation, Harvard Soil Mech. Series, No. 81. Pierce Hall, Harvard University, 231 p. Castro, G. (1975). "Liquefaction and Cyclic Mobility of Saturated Sands." Journ. of the Geot. Eng. Div., ASCE, 101(GT6), p. 551-570. Castro, G. and Christian, J.T. (1976). "Shear Strength of Soils and Cyclic Loading." Journ. of the Geot. Eng. Div., ASCE, 102(GT9), p. 887-894. Castro, G. and Poulos, S.J. (1977). "Factors Affecting Liquefaction and Cyclic Mobility." Journ.. of the Geot. Eng. Div., ASCE, 103(GT6), p. 501-516. Castro, G., Poulos, S.J., France, J.W., and Enos, J.L. (1982). "Liquefaction Induced by Cyclic Loading." Report Submitted to the National Science Found., Washington D.C., 80 p. Chapman, G. A. (1974). “A Calibration Chamber for Field Test Equipment.” Proc. of the European Symp. on Penetration Testing, ESOPT, Stockholm, p. 59-65. Davis, R.O. and Berrill, J.B. (1982). "Energy Dissipation and Seismic Liquefaction in Sands." Earthquake Engineering and Structural Dynamics, Vol. 10, p. 59-68. Durgunoglu, H. T. and Mitchell, J. K. (1974). “Influence of Penetrometer Characteristics on Static Penetration Resistance.” Proc. of the European Symp. on Penetration Testing, ESOPT, Stockholm, p. 133-139. Durgonoglu, H.T. and Mitchell, J.K. (1975). "Static Penetration Resistance of Soils." Parts I-II, Proc. of the ASCE Specialty Conf. on In-Situ Measurement of Soil Properties, Raleigh, 1, p. 151-189. Eid, W. (1987). “Scaling Effect in Cone Penetration Testing in Sand.” Ph.D. Dissertation, Virginia Tech, Blacksburg, VA, 244 p. Figueroa, J.L., Saada, A.S., Liang, L., and Dahisaria, N.M. (1994). "Evaluation of Soil Liquefaction by Energy Principles." Jour. Of Geot. Engrg., 120(9), p. 1554-1569.

296

John A. Bonita

References

Filho, P. R. (1979). “Behavior of Cone Penetration Tests in Saturated Sands.” Ph.D. Dissertation, Univ. of London, Imperial College of Science and Tech. 263 p. Filho, P. (1982). “Influence of Excess Pore Pressure on Cone Measurements.” 2nd European Symp. on Penetration Testing, ESOPT II, Amsterdam, A.A. Balkema, p. 805-811. Filz, G.M. and Duncan, J.M. (1992). "An Experimental and Analytic Study of Earth Loads on Rigid Retaining Walls." Geotechnical Engineering Division, Dept. of Civil Engineering, Virginia Tech, Blacksburg, VA, 345 p. Finn, L.D., Pickering, D.J., and Bransby P.L. (1971). "Sand Liquefaction in Triaxial and Simple Shear Tests." Journ. of the Soil Mech. and Found. Div., ASCE, 97(SM4), p. 639-660. Ghionna, V. and Jamiolkowski, M. (1991). "A Critical Appraisal of Calibration Chamber Testing of Sands." Proc. of the 1st Intern. Symp. on Calibration Chamber Testing/ISOCCT1, H.B. Huang (ed), Potsdam, NY, p. 13-40. Gomez, J. E., Filz, G.M., and Ebleling, R.M. (1999). "Development of an Improved Numerical Model for Concrete-to-Soil Interfaces in Soil-Structure Interaction Analyses." Report 1: Preliminary Study, WES, Vicksburg, MS, 139 p. Gutenberg, B. and Richter, C.F. (1956). "Magnitude and Energy of Earthquakes." Annali di Geofisica, 9, p. 1-15. Hardin, B.O. and Richart, F.E. (1963). "Elastic Wave Velocities in Granular Soils." Journ. Soil Mech. and Found. Div., ASCE, 89(SM1), p. 33-65. Hazen, A. (1920). "Hydraulic Fill of Dams." ASCE Transactions, Vol. 83, p. 1713-1745. Holden, J.C. (1991). "History of the First Six CRB Calibration Chambers." Proc. of the 1st Intern. Symp. on Calibration Chamber Testing/ISOCCT1, H.B. Huang (ed), Potsdam, NY, p. 1-11. Houlsby, G. and Hitchman, R. (1988). “Calibration Chamber Tests of a Cone Penetrometer in Sand.” Geotechnique, 38 (No. 1), p. 39-44. Ishihara, K. (1985). "Stability of Natural Deposits During Earthquakes." Proc. of the 11th Intern. Conf. on Soil Mech. and Found. Engineering, San Francisco, Vol. 2, p.321-376. Ishihara, K., Yamazaki, A., and Haga, K. (1985). “Cyclic Rotation of Principal Stress Direction with Lateral Constraints.” Jap. Soc. of Soil Mech. and Found. Eng., 25(3), 63-74.

297

John A. Bonita

References

Ishihara, K. (1993). “Liquefaction and Flow Failure During Earthquakes.” Geotechnique, 43(3), p. 351-415. Janbu, N. and Senneset, K. (1974). "Effective Stress Interpretation of In-Situ Static Penetration Tests." Proc. of the Europ. Symp. on Penetr. Test, ESOPT, Stockholm, 2.2, p. 181-193. Jamiolkowski, M. Ladd, C.C., Germaine, J.T., and Lancellotta, R. (1985). " New Developments in Field and Laboratory Testing of Soils." State -of-the-Art Report: Proc. of the 11th Intern. Conf. on Soil Mech. and Found. Engineering, San Francisco, CA, Vol. 1, p. 57-153. Jones, G. A. and Rust, E. (1982). “Piezometer Penetration Testing.” Proc. of the 2nd European Symp. on Penetration Testing, ESOPT-II, Amsterdam, p. 607-613. Kayen, R.E. and Mitchell, J. K. (1997). “Assessment of Liquefaction Potential During Earthquakes by Arias Intensity.” Journ. of Geot. and Geoenv. Eng., 123(12), p. 1162-1174. Koga, Y., Sasaki, Y., Itoh, Y., and Matsuo, O. (1986). “Field Investigation of Seismically Damaged Sites by Use of a Vibratory Cone Penetrometer.” 18th Joint Meeting of the U.S.-Japan Panel on Wind and Seismic Effects, Washington D.C., p. 1-12. Kovacs, W.D. and Salomone L.A. (1982). "SPT Hammer Energy Measurements." Jour. Of Geot. Engrg., 108(GT4), p. 599-620. Kramer, S.L. (1989). “Uncertainty in Steady-state Liquefaction Evaluation Procedures.” Journ. of Geot. Eng., ASCE, 115(10), p. 1402-1419. Kramer, S.L. (1996). Geotechnical Earthquake Engineering. Prentice Hall Publishing. Upper Saddle Hill, NJ, 653 p. Kulhawy, F.H. and Mayne P.W. (1990) "Manual on Estimating Soil Properties for Foundation Design." Electric Power Research Institute, EPRI, Palo Alto, 306 p. Last, N. (1982). “The Cone Penetration Test in Granular Soils.” Ph.D. Dissertation, University of London, King's College. 465 p. Law, K.T., Cao, Y.L., and He, G.N. (1990). "An Energy Approach for Assessing Seismic Liquefaction Potential." Can. Geot. Journ., 27, p. 320-329. Lhuer, J.M. (1976). “An Experimental Study of Quasi-Static Cone Penetration in Saturated Sands.” M.S. Thesis, University of Florida, Gainesville, 129 p. Lunne, T., Robertson, P. K., and Powell, J. (1997). Cone Penetration Testing in Geotechnical Practice, Blackie Academic and Professional.

298

John A. Bonita

References

Martin, G. R., Finn, L.D., and Seed, H.B. (1975). "Fundamentals of Liquefaction Under Cyclic Loading." Journ. of Geot. Eng. Div., ASCE, 101(GT5), p. 423-438. Mayne, P.W. and Bacchus, R.C (1988). "Profiling OCR in Clays by Piezocone Soundings." Proc. of the Inter. Symp. on Penetration Testing, ISOPT-1, Orlando, 2, p. 857-864. Mitchell, J.K., Chatoian, J.M., and Carpenter, G.C. (1976). "The Influences of Sand Fabric on Liquefaction Behavior." Report to U.S. Army Engineer Waterways Experiment Station, No. TE-76-1, Contract Report No. S-76-5. Mitchell, J.K. (1978). "In-situ Techniques for Site Characterization." Site Characterization, ASCE Specialty Workshop, Northwestern University, p.107129. Mitchell, J.K. and Keavany, J.M. (1986). "Determining Sand Strength by Cone Penetrometer." Proc. ASCE Specialty Conf. In-Situ '86: Use of In-Situ Tests in Geotechnical Engrg., Blacksburg, p. 823-839. Mitchell, J.K. and Tseng, D.J. (1990). "Assessment of Cone Liquefaction Potential by Cone Penetration Resistance." In Proc. of the H. Bolton Seed Memorial Symp., Berkeley, CA, J.M. Duncan (ed), Vol. 2, BiTech Publ., p. 335-350. Mitchell, J.K. and Brandon, T.L. (1998). "Analysis and Use of CPT in Earthquake and Environmental Engineering." In Proc. of 1st Inter. Conf. on Site Char.- ISC'98, Atlanta, GA, in Geotechnical Site Characterization, P.K Robertson and P.W. Mayne (eds), Vol. 1, A.A. Balkema., p. 69-97. Moller, B. and Bergdahl U. (1981). "Dynamic Pore Pressure During Pile Driving in Fine Sand." Proc. Of the 10th Inter. Conf. Soil Mech. and Found. Eng., Stockholm, Vol. 2, p. 791-794. Moore, D. M. (1987). “Evaluation of the Vibrating Cone Penetrometer, and It's Effect on Cone Bearing and Pore Pressure.” B.S. Thesis, Univ. of British Columbia,73 p. Moroto, N. (1995). "Liquefaction Potential of Sandy Ground Derived From Energy Consideration." 1st Int. Conf. on Geot. Engrg.- Proc. IS-Tokyo'95, Vol. 2, p. 905910. Negussey, D. and Islam, M.S. (1994). “Uniqueness of Steady State and Liquefaction Potential.” Can. Geot. Journ., 31, p. 132-139. Nogami T., Ren, F., Chen, J., and Mason, A. (1997). "Vertical Vibration of Pile in Vibration-Induced Excess Pore Pressure Field.” Jour. of Geo. and Geoenv. Eng., 123(5), p. 422-429.

299

John A. Bonita

References

Nuttli, O.W. (1979). "The Relation of Sustained Maximum Ground Acceleration and Velocity to Earthquake Intensity and Magnitude." WES, Miscellaneous Paper S76-1, Report 16. Olsen, R.S. (1994). "Normalization and Prediction of Geotechnical Properties Using the Cone Penetometer Test (CPT)." Ph.D. Dissertation, Univ. of California at Berkley, Berkeley, CA, 290 p. Olsen, R.S. and Koester, J.P. (1995). "Prediction of Liquefaction Resistance Using the CPT." Proc. CPT'95, Linkopoing, Sweden, Vol. 2, p. 251-256. Olsen R.S. and Mitchell, J.K. (1995). "CPT Stress Normalization and Prediction of Soil Classification." Proc. Of the Intern. Symp. On Cone Penetration Testing, CPT'95, Linkoping, Sweeden. Olsen, R.S. (1997). "Cyclic Liquefaction Based on the Cone Penetration Test." In Proc. of the NCEER Workshop on Evaluation of Soil Liquefaction of Soils, T. Youd and I. Idriss (eds), NCEER Tech. Rept. NCEER-97-0022, p. 225-276. Parkin, A.K. and Lunne, T. (1982). "Boundary Effects in the Laboratory Calibration of a Cone Penetrometer in Sand." Proc. 2nd Inter. Symp. On Penetr. Test., ESOPT-II, Amsterdam, Vol. 2, p. 761-768. Polito, C.P. (1999). "The Effects of Non-Plastic and Plastic Fines on the Liquefaction of Sandy Soils." Ph.D. Dissertation, Department of Civil Engineering, Virginia Tech, Blacksburg, VA. Porter, J.R. (1998). "An Examination of the Validity of Steady State Shear Strength Determination Using Isotropically Consolidated Undrained Triaxial Tests." Ph.D. Dissertation, Department of Civil Engineering, Virginia Tech, Blacksburg, VA. Rauch, A.F. (1997). "EPOLLS: An Empirical Method for Predicting Surface Displacements Due to Liquefaction-Induced Lateral Spreading in Earthquakes." Ph.D. Dissertation, Department of Civil Engineering, Virginia Tech, Blacksburg, VA. Reese, J. D. (1975). “An Experimental Study of the Effects of Saturation on the qc and fs Values from Cone Penetration Tests in the UF Calibration Chamber,” M.S. Thesis, University of Florida, Gainesville, 120 p. Richart, F.E., Hall, J.R., and Woods, R.D. (1970). Vibrations of Soils and Foundations, Prentice Hall International Series, 414 p. Robertson, P.K. (1982). "In-Situ Testing of Soil with Emphasis on Its Application to Liquefaction Assessment." Ph.D. Dissertation, University of British Columbia.

300

John A. Bonita

References

Robertson, P.K. and Campanella R.G. (1983). "Interpretation of the Cone Penetrometer Test: Part I: Sand." Can. Geot. Journ., 20(4), p. 718-733. Robertson, P. K. and Campanella, R. G. (1985). “Liquefaction Potential of Sands Using the Cone Penetration Test.” Journ. of Geot. Eng., ASCE, 22(3), p. 298-307. Robertson, P.K. (1994). "Suggested Terminology for Liquefaction: An Internal CANLEX Report." University of Alberta, Edmonton, Alberta. Robertson, P. K. and Fear, C. (1995a). “Liquefaction of Sands and Its Evaluation: Keynote Lecture.” IS Tokyo '95, Proc. of the 1st Intern. Conf. on Geotechnical Earthquake Engineering, Tokyo, Japan, AA Balkema. Robertson, P. K. and Fear, C. (1995b). “Application of CPT to Evaluate Liquefaction Potential.” Intern. Symp. on Cone Penetration Testing, CPT '95, Linkoping, Sweden, Swedish Geotechnical Society, p. 57-79. Robertson, P.K. and Wride, C.E. (1998). "Evaluating Cyclic Liquefaction Potential Using the Cone Penetration Test." Can. Geot. Journ., 35, p. 442-459. Ruiter, J.D. (1982). "The Static Cone Penetration Test: State-of-the-Art Report." 2nd Eur. Symp. on Penetr. Testing, ESOPT II, Amsterdam, A.A. Balkema, p. 389-405. Salgado, R., Mitchell, J. K., and Jamiolkowski, M. (1997). “Cavity Expansion and Penetration Resistance in Sand.” Journ. of Geot. and Geoenv. Eng., 123(4), p. 344-354. Salgado, R., Mitchell, J. K., and Jamiolkowski, M. (1998). “Calibration Chamber Size Effects on Penetration Resistance of Sand.” Jour. of Geo. and Geoenv. Eng., 124(9), p. 878-888. Sasaki, Y. and Koga, Y. (1982). “Vibratory Cone Penetrometer to Assess the Liquefaction Potential of the Ground.” 14th Joint Meeting of the U.S.-Japan Panel on Wind and Seismic Effects, Washington D.C., p. 541-555. Sasaki, Y., Itoh, Y., and Shimazu, T. (1984). “A Study of the Relationship Between the Results of Vibratory Cone Penetration Tests and Earthquake Induced Settlement of Embankments.” Proc., 19th Annual Meeting of JSSMFE. Sasaki, Y., Koga Y., Itoh, Y., Shimazu, T., and Kondo, M. (1985). “In Situ Test for Assessing Liquefaction Potential Using Vibratory Cone Penetrometer.” 17th Joint Meeting of the U.S.-Japan Panel on Wind and Seismic Effects, Tsukuba, p. 396409.

301

John A. Bonita

References

Schmertmann, J. H. (1974a). “Penetration Pore Pressure Effects on Quasi Static Cone Bearing qc.” Proc. of the European Symp. on Penetration Testing, ESOPT, Stockholm, p. 345-351. Schmertmann, J. H. (1974b). “Pore Pressure that Produce Nonconservative qc Data.” Discussion to European Symp. on Penetration Testing, ESOPT, Stockholm, p. 146-149. Schmertmann, J. H. (1976). "An Updated Correlation Between Relative Density, Dr, and Fugro-Type Electric Cone Bearing, qc." Contract Report DACW 39-76 M6646, WES, Vicksburg, MS Schmertmann, J. H. (1978). “Guidelines for Cone Penetration Test - Performance and Design.” FHWA-TS-78-209, Federal Highway Administration, Washington, D.C. Schnaid F. and Houlsby, G.T. (1991). "An Assessment of Chamber Size Effects in the Calibration of In-Situ Tests in Sand.” Geotechnique, 41(3), p. 437-445. Schneider, J. A., Mayne, P.W., Hendren, T.L., and Wise, C.M. (1998). “Initial Development of an Impulse Piezovibrocone for Liquefaction Evaluation.” Inter. Conf. on Physics and Mech. of Soil Liquefaction, Johns Hopkins University, Balkema, Rotterdam. Seed, H.B. and Lee, K.L. (1966). "Liquefaction of Saturated Sands During Cyclic Loading." Journ. of the Soil Mech. and Found Div., ASCE, 92(SM6), p. 105-134. Seed, H.B. and Peacock, W.H. (1971). "Test Procedures for Measuring Soil Liquefaction Characteristics." Journ. of the Soil Mech. and Found Div., ASCE, 97(SM8), p. 1081-1088. Seed, H.B. and Idriss, I.M. (1971). "Simplified Procedures for Evaluating Soil Liquefaction Potential." Journ. of the Soil Mech. and Found Div., ASCE, 97(SM9), p. 1249-1273. Seed, H.B. (1979). "Soil Liquefaction and Cyclic Mobility Evaluation for Level Ground During Earthquakes." Journ. of Geot. Eng. Div., ASCE, 105(GT2), p. 201-255. Seed, H.B., Idriss, I.M., and Arango, I. (1983). "Evaluation of Liquefaction Potential Using Field Performance Data." Journ. of Geot. Eng., ASCE, 109(3), p. 458-482. Seed, H.B. and De Alba, P. (1986). "Use of SPT and CPT Tests for Evaluating the Liquefaction Resistance of Sands." in S.P. Clemence (ed), Use of In-Situ Tests in Geotechnical Engineering. ASCE Geotechnical Specialty Publication No. 6, p. 281-302.

302

John A. Bonita

References

Shibata, T. and Teparaksa. (1988). “Evaluation of Liquefaction Potential of Soils Using Cone Penetration Tests.” Soil and Foundations, 28(2), p. 49-60. Shinn, J. (1999). “Sonic-CPT Probing In Support of DNAPL Characterization.” Applied Research Associates (ARA) (in house publication). Silver, M.L., Chan, C.K., Ladd, R.S., Lee K.L., Tiedemann, D.A., Townsend, F.C., Valera, J.E., and Wilson, J.H. (1976). "Cyclic Triaxial Testing of Saturated Test Sand." Jour. of the Geot. Engrg. Div., 102(5), p. 511-524. Simcock, K.J., Davis, R.O., Berrill, J.B., and Mullenger G. (1983). "Cyclic Triaxial Tests with Continuous Measurement of Dissipated Energy." Geot. Testing Jour., GTJODJ, 6(1), p. 35-39. Singh, S., Seed, H.B., and Chan, C.K. (1979). "Undisturbed Sampling and Cyclic Load Testing of Sands." Earthquake Engineering Research Center Report No. UCB/EERC-79/33, December 1979, 138 p. Sladen, J.A. and Handford, G. (1987). “A Potential Systematic Error in Laboratory Testing of Very Loose Sand.” Can. Geot. Journ., 24, p. 462-466. Stark, T.D. and Olson, S.M. (1995). "Liquefaction Resistance Using CPT and Field Case Histories." Journ. of Geot. Eng., ASCE, 121(12), p. 856-869. Suzuki, Y., Tokimatsu, K., Koyamada, K., Taya, Y., and Kubota Y. (1995). "Field Correlation of Soil Liquefaction Based on CPT Data." Proc. CPT'95, Linkopoing, Sweden, Vol. 2, p. 583-588. Sweeney, B. (1987). “Liquefaction Evaluation Using a Miniature Cone Penetrometer and a Large Scale Calibration Chamber.” Ph.D. Dissertation, Virginia Tech, Blacksburg, 282 p. Teparaksa, W. (1987). “Use and Application of Penetration Tests to Assess Liquefaction Potential of Soils.” Ph.D. Dissertation, Kyoto University, Kyoto, Japan, 185 p. Terzaghi, K. (1925). Erdbaumechanik auf Bodenphysikalischer Grundlage. Vienna, Deuticke. Terzaghi, K., Peck, R., and Mesri, G. (1997). Soil Mechanics in Engineering Practice. John Wiley and Sons, Inc. 549 p. Tokimatsu, K. (1988). “Penetration Tests for Dynamic Problems.” Proc. of the First Intern. Symp. on Penetration Testing, ISOPT-1, Orlando, FL, AA. Balkema, p. 117-136.

303

John A. Bonita

References

Torstensson, B.A. (1982). “A Combined Pore Pressure and Point Resistance Probe.” 2nd Eur. Symp. on Penetr. Testing, ESOPT II, Amsterdam, A.A. Balkema, p. 903-908. Towhata, I. and Ishihara, K. (1985). "Shear Work and Pore Water Pressure in Undrained Shear." Soils and Foundations, 25(3), p. 73-84. Tumay, M. T., Boggess, R. L., and Acar, Y. (1981). “Subsurface Investigations with a Piezo-Cone Penetrometer.” ASCE Special Publication on Cone Penetrometer Testing and Experience, St. Louis, p. 325-342. Vaid, Y.P. and Thomas, J. (1995). “Liquefaction and Post Liquefaction Behavior of Sand.” Journ. of Geot. Eng., ASCE, 121(2), p. 163-173. Vesic, A.S. (1972). "Expansion of Cavities in Infinite Soil Mass." Journ. of Soil Mech. and Found. Div., 98(3), p. 265-290. Vesic, A.S. (1977). "Design of Pile Foundations." NCHRP Rep. No. 42, Nat. Coop. Hwy. Res. Prog., Trans Res. Board, Washington, D.C. Villet, W.C and Mitchell, J.K. (1981). "Cone Resistance, Relative Density, and Friction Angle." Cone Penetration Testing and Experience: Specialty Session at the ASCE National Conference, St. Louis, p. 178-207. Yokel, F.Y. (1982). "Energy Transfer in Standard Penetration Test." Jour. Of Geot. Engrg., 108(GT9), p. 1197-1201. Yu, H.S. and Mitchell, J. K. (1998). “Analysis of Cone Resistance: A Brief Review of Methods.” Journ. of Geot. and Geoenv. Eng., 124(2), p. 140-149. Wise, C. M. (1998). “Development of Prototype Piezovibrocone Penetrometer for the InSitu Evaluation of Soil Liquefaction Susceptibility.” M.S. Thesis, Georgia Tech., 176 p. Wise, C.M., Mayne, P.W., and Schneider, J. A., (1999). “Prototype Piezovibrocone for Evaluating Soil Liquefaction Susceptibility.” Proc. 2nd Inter. Conf. on Earthquake Geot. Eng., Lisbon, Portugal, Balkema, Rotterdam, p. 537-542. Yokel, F.Y. (1982). "Energy Transfer in Standard Penetration Test." Jour. of Geot. Engrg., 108(GT9), p. 1197-1201. Youd, T.L. (1972). "Compaction of Sands by Repeated Shear Straining." Jour. of the Soil Mech. and Found Div., ASCE, 98(SM7), p. 709-725.

304

John A. Bonita

References

Youd, T. and Idriss, I. (1997). “Proceedings of the NCEER Workshop on Evaluation of Liquefaction Resistance of Soils.” NCEER-97-0022, NCEER, Salt Lake City, Utah. Zuidberg, H.M. (1988). “Piezocone Penetration Testing–Probe Development.” Proc. of the 2nd Intern. Symp. on Penetration Testing, ISOPT-1, Orlando, Specialty Session No. 13, 24 March, 1988, Balkema Pub., Rotterdam.

305